user_guide
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
user_guide [2017/09/21 14:40] admin [Firmware Update] |
user_guide [2019/08/29 13:19] (current) admin |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| **TB Series MIDI FOOT CONTROLLER (TB-12/TB-11P/TB-8/TB-6P/TB-5)** | **TB Series MIDI FOOT CONTROLLER (TB-12/TB-11P/TB-8/TB-6P/TB-5)** | ||
| - | **Firmware version 2.6pb Public Beta** | + | **Firmware version 2.9** |
| [[user_guide_rus|Читать руководство пользователя на русском языке]] | [[user_guide_rus|Читать руководство пользователя на русском языке]] | ||
| Line 518: | Line 518: | ||
| BJ Devices TB-series midi controllers have an USB interface for connection to a computer, but are not PC-compatible MIDI devices. In order to use the controller as a MIDI device via USB, follow these steps: | BJ Devices TB-series midi controllers have an USB interface for connection to a computer, but are not PC-compatible MIDI devices. In order to use the controller as a MIDI device via USB, follow these steps: | ||
| - Install serial to midi converter Hailess MIDI http://projectgus.github.io/hairless-midiserial/ | - Install serial to midi converter Hailess MIDI http://projectgus.github.io/hairless-midiserial/ | ||
| - | - Install virtual MIDI port LOOPMidi(not needed for MAC) http://www.tobias-erichsen.de/software/loopmidi.html | + | - For Windows install virtual MIDI port LOOPMidi(not needed for MAC) http://www.tobias-erichsen.de/software/loopmidi.html |
| + | - For MacOs enable the “IAC” virtual MIDI port. Applications->Utilities->“Audio MIDI Setup”->“Show MIDI Window”->“IAC Driver” check the “Device is online” box in the dialog that appears. | ||
| - Install USB-COM driver (in most cases this installation starts automatically) http://www.ftdichip.com/Drivers/VCP.html | - Install USB-COM driver (in most cases this installation starts automatically) http://www.ftdichip.com/Drivers/VCP.html | ||
| - | - Run Hairless MIDI<->Serial Bridge, choose COM port which is according TB-series controller COM port, assign COM port to midi OUT device LOOPMidi, set baud rate 56000. | + | - Run Hairless MIDI<->Serial Bridge, choose COM port which is according TB-series controller COM port, assign COM port to midi OUT device LOOPMidi(or IAC for MacOs), set baud rate 56000. |
| - IN controller set System setup -> USB baudrate value to 56000 | - IN controller set System setup -> USB baudrate value to 56000 | ||
| {{screen_usb_baudrate.png?240}} | {{screen_usb_baudrate.png?240}} | ||
| - | Now you can connect your software to LOOPMidi port, all MIDI messages from TB-12(5) will be passed to | + | Now you can connect your software to LOOPMidi port(or IAC for MacOs), all MIDI messages from TB-12(5) will be passed to |
| LOOPMidi port. | LOOPMidi port. | ||
| Line 531: | Line 532: | ||
| - Download latest firmware for your device from product’s page | - Download latest firmware for your device from product’s page | ||
| - Download latest driver from http://www.ftdichip.com/Drivers/VCP.htm | - Download latest driver from http://www.ftdichip.com/Drivers/VCP.htm | ||
| - | - Download chip45boot2 GUI software for Windows https://www.chip45.com/avr_bootloader_atmega_xmega_chip45boot2.php , for MacOs http://www.definefalsetrue.com/index.php/en/97-bootfeedq-v101-released-2 , for Linux https://github.com/bullestock/c45b | + | - Download chip45boot2 GUI software for Windows https://www.chip45.com/avr_bootloader_atmega_xmega_chip45boot2.php , for MacOs https://www.definefalsetrue.com/index.php/en/downloads/download/3-mac-osx/7-bootfeedq , for Linux https://github.com/bullestock/c45b |
| === Driver and software installation === | === Driver and software installation === | ||
user_guide.1505994034.txt.gz · Last modified: 2017/09/21 14:40 by admin
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
