This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
user_guide_en_gen_3 [2020/08/23 00:19] admin [Настройка педали] |
user_guide_en_gen_3 [2021/07/21 17:55] (current) admin |
||
---|---|---|---|
Line 58: | Line 58: | ||
Install chip45boot2 application to update the firmware. Download the application: | Install chip45boot2 application to update the firmware. Download the application: | ||
- | - For Windows : [[https://www.chip45.com/categories/chip45boot2_avr_atmega_xmega_uart_bootloader_frei_kostenlos_hexfiles.php]] | + | - For Windows : [[https://www.chip45.com/media/products/chip45boot2_GUI_V1-13.zip]] |
- For MacOs : | - For MacOs : | ||
Line 185: | Line 185: | ||
The basic settings for the built-in and external pedals are the same. From the home screen, press [SETUP / NO] key to enter the setup menu. Use [<] and [>] keys to select EXP & TAP & TUNE menu section and when press [LOAD / OK] key. TAP CC subsection will displayed. If this is the first time you are using controller, it is recommended to calibrate expression pedals. Use [<] and [>] keys to select the EXP ONBRD CLB subsection and refer to Pedal Calibration section. Use [<] and [>] keys to select the EXP. ONBRD and press [LOAD / OK] key. Use [^] and [v] keys to select the CC number to be sent when the pedal position is changed. Press [LOAD / OK] key to save setting. | The basic settings for the built-in and external pedals are the same. From the home screen, press [SETUP / NO] key to enter the setup menu. Use [<] and [>] keys to select EXP & TAP & TUNE menu section and when press [LOAD / OK] key. TAP CC subsection will displayed. If this is the first time you are using controller, it is recommended to calibrate expression pedals. Use [<] and [>] keys to select the EXP ONBRD CLB subsection and refer to Pedal Calibration section. Use [<] and [>] keys to select the EXP. ONBRD and press [LOAD / OK] key. Use [^] and [v] keys to select the CC number to be sent when the pedal position is changed. Press [LOAD / OK] key to save setting. | ||
====== Load bank menu ====== | ====== Load bank menu ====== | ||
- | Находясь на [[#Домашний экран|домашнем экране]], нажмите клавишу [LOAD/OK] на [[#Консольная клавиатура|консольной клавиатуре]], чтобы войти в меню переключения банка. | + | From [[# Home screen | home screen]], press [LOAD / OK] key on [[# Console keyboard | console keyboard]] to enter the Bank Switch menu. |
- | * Используйте клавиши [^] и [v] для выбора необходимого банка. | + | * Use [^] and [v] keys to select nessesary bank. |
- | * Нажмите клавишу [LOAD/OK] еще раз для загрузки выбранного банка и возвращения на [[#Домашний экран|домашний экран]]. | + | * Press [LOAD / OK] key again to load the selected bank and return to [[# Home screen | home screen]]. |
- | ====== Меню настройки ====== | + | ====== Setp menu ====== |
- | Находясь на домашнем экране, нажмите клавишу [SETUP/NO] на [[#Консольная клавиатура|консольной клавиатуре]], чтобы войти в меню настройки. | + | From the home screen, press [SETUP / NO] key on [[# Console keyboard | console keyboard]] to enter the setup menu. |
===== BANKS ===== | ===== BANKS ===== | ||
Настройки банков. | Настройки банков. |